Essential Maintenance Tips to Extend Your E-Skateboard’s Lifespan

Essential Maintenance Tips to Extend Your E-Skateboard’s Lifespan

🔧 Introduction: Why Maintenance Matters

An electric skateboard is more than a toy — it’s a high-performance personal vehicle. And like any vehicle, proper maintenance is key to ensuring safety, performance, and longevity.

Many riders overlook the small things that can eventually lead to big repairs. The good news? With just a few simple routines, you can dramatically extend the lifespan of your e-board and avoid costly breakdowns or battery replacements.

Let’s walk through the essential weekly, monthly, and seasonal maintenance tips every electric skateboard owner in Australia should know.

🧽 1. Cleaning & Care: Keep Your Ride Fresh

✔️ What to Clean (Weekly)

  • Deck: Wipe down with a damp cloth. Avoid soaking the grip tape.

  • Wheels & Trucks: Remove dust, leaves, gravel, and debris from axles and bearings.

  • ESC Case & Motors: Use compressed air to clear dust. Never spray water.

  • Remote: Wipe clean and inspect for cracks or sticky buttons.

🧠 Avoid using high-pressure hoses or submerging any part of the board — moisture damages electronics.

Read Waterproofing Tips to protect your board in wet weather.

🔋 2. Battery Health: Protect the Heart of Your Board

Lithium-ion batteries are the most expensive and sensitive part of your electric skateboard. Here's how to treat them right:

⚡ Charging Do’s & Don’ts

✅ Do:

  • Use only the original charger

  • Keep the charge level between 30% and 80% when storing

  • Let the battery cool after riding before plugging in

❌ Don’t:

  • Charge overnight unsupervised

  • Let the battery sit at 0% for extended periods

  • Store near heaters or in direct sunlight

💡 Charge your board after most rides, but don’t top it off constantly if not needed.

See our Full Charging Guide

🔩 3. Mechanical Checks: Safety First

Loose hardware can lead to speed wobbles or accidents. A few minutes a week can save your skin — literally.

🛠 Weekly Checklist

  • 🔧 Tighten all nuts/bolts: Especially wheel nuts and kingpin

  • 🧰 Check bushings: Replace if cracked or overly soft

  • 🎡 Spin wheels by hand: Listen for grinding (could mean bearing issues)

  • 💨 Inspect motor belts or hubs: Look for fraying or cracks

Shopping for spares? Check our Accessories & Replacement Parts

🛹 4. Tyres & Bearings: The Silent Killers

Whether you’re using urethane wheels or pneumatic tyres, your ride depends on good rolling parts.

🧼 Bearing Maintenance (Monthly)

  • Remove bearings from wheels

  • Soak in isopropyl alcohol for 30 minutes

  • Dry thoroughly

  • Re-lubricate with light bearing oil

  • Reinstall and spin-test

🌬 For AT Boards:

  • Maintain air pressure as per the manufacturer

  • Look for bulges, tread wear, or leaks

Commuter or trail rider? See Top Boards for City & Off-Road

🖥 5. Remote, ESC & Firmware

If your board has an intelligent remote or app control, make sure to:

  • Check for firmware updates (monthly)

  • Calibrate the throttle and brakes periodically

  • Replace remote batteries when needed

  • Inspect cable connections and housing

🧠 A glitchy remote is not just annoying — it can be dangerous.

📦 6. Seasonal Storage Tips

Not riding this winter or going on holiday? Proper storage prevents battery degradation and corrosion.

✅ Storage Checklist

  • Charge battery to 60%

  • Store in a cool, dry indoor space

  • Elevate the board slightly (don’t rest on wheels for long-term)

  • Cover with a breathable cloth (don’t seal in moisture)

  • Disconnect the remote

🔐 Bonus: Add a reminder to your calendar to recharge every 4–6 weeks if you haven't used it.

🔍 7. Signs You Need a Service or Replacement

  • The board vibrates or jerks when accelerating

  • Motors sound rough or overheat

  • Shortened battery life despite charging habits

  • Strange clicking or resistance in the wheels

  • Remote loses connection or skips input

If you notice these, it’s time for a tune-up or replacement part.

See our Top Mistakes Buyers Make

🧠 Bonus: Maintenance Kit Must-Haves

Every rider should keep a basic tool and care kit ready:

🧰 Essentials:

  • Skate T-tool

  • Allen key set

  • Spare belts or bearings

  • Bearing lube

  • Soft brush or cloth

  • Electrical tape & zip ties

🛒 Grab your full E-Skate Maintenance Kit

✅ Final Thoughts: Ride Smarter, Last Longer

Maintaining your electric skateboard isn’t hard, but it’s crucial.

With just a few minutes a week, you can:

  • Keep your rides safe and smooth

  • Extend your battery life by 2–3 years

  • Avoid nasty mid-commute surprises

  • Save $$$ on repairs and replacements

Want a board that lasts?
Start with quality — and back it up with care.

🛍 Browse Long-Lasting Electric Skateboards
📚 Or explore more tips in our E-Skate Guide Hub

Back to blog